Small Chisel of Hammer Breaker in Backhoe for excavator 416
Specifications
1)Alloy steel material, super heat treatment technology
2)hydraulic hammer Hydraulic Chisel
3)High quality&reasonable price
Packaging & Delivery
Packaging Details: Standard wooden cases or as customer's requirements
Delivery Detail: Within1~2 weeks upon receipt of order confirmation and payments
We are specializing in manufacturing the hydraulic breaker and hydraulic breaker spare parts, such as chisel, piston, front head & back head, through bolt & side bolt, chisel pin, stop pin, outer bush, (lower bush, front bush), inner bush, (upper bush, thrust bush), hydraulic cylinder and so on. We have good reputation by our high quality products, competitive price and adequate service at home and abroad for long years.
1)furukawa hydraulic breaker chisel advantage:
1. High density
2. Good toughness
3. Strong wear-resistance
4. Long service-life
5. Low breakage-rate
2)Function of furukawa hydraulic breaker chisel:
Smash the rocks by impacting power made by strike piston, and protect the hydraulic breaker to avoid the breakage caused by excessive radial force, In other words, if the work encountered excessive radial force, steel chisel in the hydraulic breaker will break before the fracture of the breaker, thereby to protect the hydraulic breaker.
3)Selection of the appropriate furukawa hydraulic breaker chisel:
Cone steel chisel
The energy provided will have a very marvelous penetration when through point. Split power being transmitted around, and no reverse.
Flat steel chisel
Excellent split power, good penetration, torque will have a direct role in the rock.
Horizontal steel chisel
The energy provided by a large surface, the best crushing effect, no torque occurs at a fixed pin.
4) furukawa hydraulic breaker chisel quanlity guanrantee standard:
You can obtain compensation if subject to warranty conditions:
1. Full compension if fracture takes place wear 50mm below from the tip of the steel chisel.
2.50% compensation if the fracture occurrs wear 100mm below from the tip of the steel chisel.
3. No compensation if the fracture occurrs wear 200mm below from the tip of the steel chisel.
The steel chisel is designed to be broken in order to ensure over-bending does not affect the drill hammer When some
4) furukawa hydraulic breaker chisel quanlity guanrantee standard:
You can obtain compensation if subject to warranty conditions:
1. Full compension if fracture takes place wear 50mm below from the tip of the steel chisel.
2.50% compensation if the fracture occurrs wear 100mm below from the tip of the steel chisel.
3. No compensation if the fracture occurrs wear 200mm below from the tip of the steel chisel.
The steel chisel is designed to be broken in order to ensure over-bending does not affect the drill hammer When some
| Series |
Diameter(mm) |
Length(mm) |
| HB10G |
105 |
1000 |
| HB15G |
120 |
1000 |
| HB20G |
135 |
1200 |
| HB30G |
150 |
1300 |
| HB40G |
160 |
1400 |
| HB50G |
180 |
1500 |
Audited Supplier 
){kind=link}
){kind=link}